Simple, Complete Integration
Link all substation intelligent electronic devices (IEDs) into a single, low-cost configurable contact point for SCADA, local human-machine interface (HMI), dial-in access, dial-out notification, and overall substation integration applications. Link multiple communications processors to provide redundant communications paths when necessary.
Sequential Events Recorder (SER) Functions
Receives SER messages from SEL devices and updates local SER database. Monitors optional contact inputs, time-tags transitions, and saves SER records. Sends SER records to host using DNP3 LAN/WAN and SEL Fast SER messages.
Two Plug-In Protocol-Processor Card Slots Support SEL-2700 Series Cards
Provides communication on hardware-specific local area networks. The SEL-2711 Modbus Plus Protocol Card^®connects with Modbus Plus networks. The SEL-2701 Ethernet Processor interfaces with fiber and copper Ethernet networks and includes support for Telnet, FTP, DNP3 LAN/WAN, IEC 61850/UCA2, and the OSI, TCP, and UDP stacks.
Automatic Database
Collect, store, and forward meter reports, targets, digital input status, event reports, demand meter reports, and more. Use the optional Flash memory for nonvolatile storage.
Configuration
Use the Set File Generator tool to ease the settings development of SEL communications processors. Preconfigured device templates quickly and easily establish communications between a communications processor and common substation IEDs. The Set File Generator creates settings files that can be sent to the communications processor using SEL-5020 Settings Assistant Software. It aids the communications processor expert, power user, or even the novice by decreasing time required to compose settings.
Use the SEL-5020 Settings Assistant Software to prepare settings and communicate with the communications processor.

SEL-2032 Firmware Version R110 Announcement

SEL is pleased to announce the availability of a new release of firmware for the SEL-2032 Communications Processor (Version R110). This new firmware added the following features:

Enhanced Direct Transparent functionality to allow acSELerator QuickSet^® SEL-5030 Software connections via the front port or SEL-2701 Ethernet Processor to a downstream-connected relay.
Allowed SET M equations to continue to execute during an active Direct Transparent connection on the port.
Fixed issue where Null characters may be dropped during Transparent connections.
Auto-disabled Xon/Xoff handshaking during SEL-5020 YMODEM file transfers.
Improved storage capacity for relay configuration information.
Corrected power miscalculation for older connected relays.

HOTPASH

SEL-2030